Search published articles


Showing 3 results for Carbothermic Reduction

M. Sh. Bafghi, A. Yarahmadi, A. Ahmadi, H. Mehrjoo,
Volume 8, Issue 3 (9-2011)
Abstract

Abstract:

the reduction agent. Pellets of barite ore containing about 95% BaSO

temperature, time, ore grain size and the type and grain size of the carbon materials. Graphite, coke and charcoal have

been used as the reducing agent and the reduction experiments have been performed in the temperature range of 925-

1150 °C. Apart from conducting the experiments using pellets made of ore powder, kinetic analysis of the experimental

data by use of the reduced (dimensionless) time method has been another unique feature of the present study.

Experimental results show that grain size of either carbon material or barite ore has not appreciable effect on the

reaction rate. Kinetic analysis of the experimental data revealed the rate is strongly controlled by the chemical reaction

of carbon gasification (Boudouard reaction). The reaction rate is very considerably related to the type of carbon

material so that the activation energy varies from 15.6 kcal.mol

kcal.mol

gasification.

The present study deals with the reduction of barium sulfate (Barite) to barium sulfide by use of carbon as4 has been reduced under different conditions of-1 for charcoal to 26.3 kcal.mol-1 for graphite and 20.8-1 for coke. This behavior provides further support for the postulated reaction mechanism, i.e., carbon
M. Sheikhshab Bafghi, M. Karimi, M. Adeli,
Volume 10, Issue 4 (12-2013)
Abstract

In the present study, reduction of zinc oxide from the pellets made of steelmaking electric arc furnace dust has been investigated. Effects of such parameters as the type of carbon material (graphite, coke and charcoal) as well as time and temperature on the reduction reaction have been examined. The reduced (dimensionless) time method was applied to perform a kinetic analysis of the system. Experimental results showed that increasing the temperature in the range of 925-1150°C results in a remarkable increase in the reduction rate. It was also shown that the reduction process is controlled by chemical reaction. Meaningful difference in the activation energy values calculated for reduction with graphite (24.75 kcal/mol), coke (18.13 kcal/mol) and charcoal (11.52 kcal/mol) indicate the predominant role of chemical reaction (carbon gasification) in the overall reaction rate and its rate-controlling mechanism. Carbothermal reduction of pelletized EAF dust proved to be an efficient reduction method, so that above 90% reduction was achieved in about one hour at temperatures around 1100°C.
A. Khalili, M. Mojtahedi, M. Goodarzi, M. J. Torkamani,
Volume 16, Issue 3 (9-2019)
Abstract

The aim of this work was to synthesize TiC reinforced coating on carbon steel via reduction of ilmenite powder. A mixture of ilmenite and graphite was pre-placed on AISI 1020 steel surface. The effect of the addition of excess graphite amounts on the progress of synthesis of carbide particles was studied. The evolution of phases in different coatings was analysed via X-ray diffraction and scanning electron microscopy. Then again, the initial powder mixtures were mechanically activated for various durations, to accelerate the reactions in transient melt pool. Finally, the Fe-TiC hard coating was successfully synthesized by carbothermic reduction of ilmenite through laser surface treatment. Moreover, it is proved that combination of mechanical activation with additive laser melting effectively improves the level of ilmenite reduction, besides enhancing the distribution of hard particles and the hardness of the coatings to more than 1300 HV.


Page 1 from 1     

© 2022 All Rights Reserved | Iranian Journal of Materials Science and Engineering

Designed & Developed by : Yektaweb