Showing 2 results for Heshmati-Manesh
A. Ataie1,, S. Heshmati-Manesh1,, S. Sheibani1,, G. R. Khayati,y. Firozbakht,
Volume 5, Issue 1 (winter 2008 2008)
Abstract
Abstract: In this paper solid state reduction of high carbon ferrochromium-chromite composite
pellets in the temperature range of 900-1350°C was investigated. A two stage reduction
mechanism is proposed. The first stage is likely to be controlled by the chemical reaction with
activation energy of 127.2kJ/mol. In the second stage, solid state diffusion of carbon through the
reaction product layer is suggested to be rate controlling. The activation energy of this stage was
calculated to be 93.1kJ/mol. The reduction process was found to be favored by high temperatures
as well as high vacuum. The results also show that pre-milling of initial mixture has a negative
effect on the reduction degree.
Mrs Somaye Alamolhoda, Dr Saeed Heshmati-Manesh, Dr Abolghasem Ataie,
Volume 7, Issue 3 (summer 2010 2010)
Abstract
In this research an ultra-fine grained composite structure consisting of an intermetallic matrix together with dispersed nano-sized Al2O3 obtained via mechanical activation of TiO2 and Al in a high energy ball mill and sintering of consolidated samples. Phase composition and morphology of the milled and sintered samples were evaluated by XRD and SEM techniques Thermal behavior of the powder sample milled for 8 hours was evaluated by DTA technique. DTA results showed that, the reaction happens in two steps. The first step is the aluminothermic reduction of TiO2 with Al. XRD observations reveals that minor amount of Ti3Al phase formed during reduction reaction together with TiAl and Al2O3 major phases. This intermetallic phase disappeared when sintering temperature was increased to 850 ºC. The second step in DTA is related to a reaction between residual Al in the system (partly dissolved in TiAl lattice) and the Ti3Al phase produced earlier at lower temperatures. SEM micrographs reveal that by completion of the reduction reaction more homogeneous and finer microstructure is observable in sintered samples.
